Boot Sector Repair Tool Download

DOWNLOAD >>>>> https://urllio.com/2tvbBQ

How to Download and Use a Boot Sector Repair Tool for Windows 10

If your Windows 10 computer won't boot, you may need to use a boot sector repair tool to fix the problem. The boot sector is a small area on your hard drive that contains vital information about how to start Windows. If the boot sector is corrupted or damaged by malware, disk errors, or improper operations, you may encounter errors like \"Bootmgr is missing\", \"Operating system not found\", or \"No bootable device\".

In this article, we will show you how to download and use a free boot sector repair tool for Windows 10 - AOMEI Partition Assistant Standard. This tool can help you create a bootable USB drive to access your unbootable Windows 10 computer, and then rebuild the master boot record (MBR) or check and fix bad sectors on the system disk. It also has many other useful features for managing your partitions and disks.

Step 1. Download AOMEI Partition Assistant Standard

AOMEI Partition Assistant Standard is a free and reliable boot sector repair tool for Windows 10/8/7 and Windows XP/Vista. You can download it from its official website or click the button below:

Download Freeware

After downloading, install and run it on a working Windows 10 computer. You will also need a blank USB drive to create a bootable media.

Step 2. Create a bootable USB drive

To create a bootable USB drive with AOMEI Partition Assistant Standard, follow these steps:

Click \"Make Boot Media\" under \"Wizard\" at the left panel and click on \"Next\".

Tick \"USB Boot Device\" and choose the inserted USB drive, then click on \"Proceed\".

Wait for the process to be done. You will get a bootable USB drive with AOMEI Partition Assistant Standard loaded.

Step 3. Boot your unbootable Windows 10 computer from the USB drive

To boot your unbootable Windows 10 computer from the USB drive, follow these steps:

Insert the bootable USB drive into your unbootable Windows 10 computer.

Restart your computer and press the specific key (usually F2, F12, DEL, or ESC) to enter the BIOS setup.

Change the boot order to make the USB drive as the first boot device.

Save the changes and exit the BIOS setup.

Your computer will boot from the USB drive and load AOMEI Partition Assistant Standard.

Step 4. Repair the boot sector of your Windows 10 system disk

To repair the boot sector of your Windows 10 system disk with AOMEI Partition Assistant Standard, follow these steps:

In AOMEI Partition Assistant Standard main interface, right-click on your system disk (usually disk 0) and select \"Rebuild MBR\".

Select the proper MBR type for your Windows 10 system and click \"OK\".

Click \"Apply\" and \"Proceed\" to execute the operation.

After rebuilding MBR, restart your computer and remove the USB drive.

Your Windows 10 computer should be able to boot normally now.

If rebuilding MBR does not fix the problem, you can also use AOMEI Partition Assistant Standard to check and fix bad sectors on your system disk. To do that, follow these steps:

In AOMEI Partition Assistant Standard main interface, right-click on your system disk (usually disk 0) and select \"Surface Test\".

Select \"Quick Check\" or \"Full Check\" according to your needs and click \"Start\".

The program will scan your disk for bad sectors and mark them with red blocks.

If there are any bad sectors found, you can right-click on your system disk again and select \"Check Partition\".

Select a way to check partition aa16f39245